Switch>Ena Switch#Config t Enter Configuration Commands, One Per Line. End

Please download to get full document.

View again

of 21
150 views
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Download

Document Related
Document Description
Switch ena Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#host S1 S1(config)#no ip dom S1(config)#no ip domain-lookup S1#config t Enter configuration commands, one per line. End with CNTL/Z. S1(config)#ena secret class S1(config)#line con 0 S1(config-line)#password cisco S1(config-line)#login S1(config-line)#line vty 0 4 S1(config-line)#password cisco S1(config-line)#login S1(config-line)#^Z %SYS-5-CONFIG_I: Configured from console by console S1#vlan
Document Share
Document Tags
Document Transcript
  Switch>enaSwitch#config tEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#host S1S1(config)#no ip domS1(config)#no ip domain-lookupS1#config tEnter configuration commands, one per line. End with CNTL/Z.S1(config)#ena secret classS1(config)#line con 0S1(config-line)#password ciscoS1(config-line)#loginS1(config-line)#line vty 0 4S1(config-line)#password ciscoS1(config-line)#loginS1(config-line)#^Z%SYS-5-CONFIG_I: Configured from console by consoleS1#vlan data% Warning: It is recommended to configure VLAN from config mode,as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode.S1(vlan)#vlan 30 name Guest(Default)VLAN 30 added:Name: Guest(Default)S1(vlan)#vlan 10 name Faculty/Staff VLAN 10 added:Name: Faculty/Staff S1(vlan)#vlan 20 name StudentsVLAN 20 added:Name: StudentsS1(vlan)#^Z%SYS-5-CONFIG_I: Configured from console by consoleS1#sh vlan brief VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4Fa0/5, Fa0/6, Fa0/7, Fa0/8Fa0/9, Fa0/10, Fa0/11, Fa0/12Fa0/13, Fa0/14, Fa0/15, Fa0/16Fa0/17, Fa0/18, Fa0/19, Fa0/20Fa0/21, Fa0/22, Fa0/23, Fa0/24Gig1/1, Gig1/2  10 Faculty/Staff active20 Students active30 Guest(Default) active1002 fddi-default active1003 token-ring-default active1004 fddinet-default active1005 trnet-default activeS1#vlan data% Warning: It is recommended to configure VLAN from config mode,as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode.S1(vlan)#vlan 56 name Management&NativeVLAN 56 added:Name: Management&NativeS1(vlan)#^ZS1#sh vlan brief VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4Fa0/5, Fa0/6, Fa0/7, Fa0/8Fa0/9, Fa0/10, Fa0/11, Fa0/12Fa0/13, Fa0/14, Fa0/15, Fa0/16Fa0/17, Fa0/18, Fa0/19, Fa0/20Fa0/21, Fa0/22, Fa0/23, Fa0/24Gig1/1, Gig1/210 Faculty/Staff active20 Students active30 Guest(Default) active56 Management&Native active1002 fddi-default active1003 token-ring-default active1004 fddinet-default active1005 trnet-default activeS1#config tEnter configuration commands, one per line. End with CNTL/Z.S1(config)#int vlan 56S1(config-if)#ip add 192.168.56.11 255.255.255.0S1(config-if)#no shutdown%LINK-5-CHANGED: Interface Vlan56, changed state to upS1(config-if)#^Z%SYS-5-CONFIG_I: Configured from console by consoleS1#ping 192.168.56.12  Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.56.12, timeout is 2 seconds:.....Success rate is 0 percent (0/5)S1#config tEnter configuration commands, one per line. End with CNTL/Z.S1(config)#int fa 0/1S1(config-if)#swicth mode trunk S1(config-if)#switch mode trunk %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed stateto down%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed stateto up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan56, changed state to upS1(config-if)#switch trunk native vlan 56S1(config-if)#exitS1(config)#int fa 0/2S1(config-if)#switch mode trunk %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed stateto downS1(config-if)#switch trunk native vlan 56S1(config-if)#%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered onFastEthernet0/2 (56), with S3 FastEthernet0/2 (1).S1(config-if)#^Z%SYS-5-CONFIG_I: Configured from console by consoleS1#ping 192.168.56.12Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.56.12, timeout is 2 seconds:.!!!!Success rate is 80 percent (4/5), round-trip min/avg/max = 27/40/47 msS1#sh runS1#ping 192.168.56.13  S2Switch>enaSwitch#config tEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#host S2S2(config)#no ip domS2(config)#S2(config)#ena sec classS2(config)#S2(config)#password cisco^% Invalid input detected at '^' marker.S2(config)#S2(config)#login^% Invalid input detected at '^' marker.S2(config)#S2(config)#line vty 0 4S2(config-line)#S2(config-line)#pass ciscoS2(config-line)#S2(config-line)#loginS2(config-line)#S2(config-line)#exitS2(config)#show run^% Invalid input detected at '^' marker.S2(config)#^Z%SYS-5-CONFIG_I: Configured from console by consoleS2#show runBuilding configuration...Current configuration : 1006 bytes!version 12.2no service password-encryption!hostname S2!enable secret 5 $1$U0D6$fdELkFrWgtucQyKsTPAmj.!
Search Related
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks