Spellbinders Compatibility Guide

Please download to get full document.

View again

of 6
205 views
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Download

Document Related
Document Description
SPELLBINDERS COMPATIBILITY CHART Wizard® Compatibility The Wizard comes with all of the mats and pads needed to cut with all of the following dies: Steel Rule Dies • Sizzix® Originals* • Zip’e Slimsâ„¢ • Compact Dies by Cross-Cuts® • Thick Cuts by Ellison Designâ„¢ • Sizzix® Bigzâ„¢ Low-Profile Dies • Sizzletsâ„¢** • Thin Cuts by Ellison Designâ„¢ • Cuttlebugâ„¢ by Provo Craft® Chemically Etched Dies• Spellbinders Style Diesâ„¢ • QuicKutz® • Zip’eCutsâ„¢ • Zipâ€
Document Share
Document Tags
Document Transcript
   SPELLBINDERS COMPATIBILITY CHART Wizard® Compatibility  The Wizard comes with all of the mats and pads needed to cut with all of the following dies: Steel Rule Dies ã Sizzix® Originals*ã Zip’e Slims™ã Compact Dies by Cross-Cuts®ã Thick Cuts by Ellison Design™ã Sizzix® Bigz™ Low-Profile Dies ã Sizzlets™**ã Thin Cuts by Ellison Design™ã Cuttlebug™ by Provo Craft® Chemically Etched Diesã Spellbinders Style Dies™ ã QuicKutz®ã Zip’eCuts™ã Zip’eSnaps™ã SAR™ (Some Assembly Required)ã BossKuts®*As of January 1, 2006 the Sizzix® Cuts-n-Folds™ Dies do not seem to work consistently well withthe Wizard System.**Sizzlet™ dies that are longer than eight inches will not work with the Wizard System.The Wizard also comes with all mats and pads needed to emboss:Spellbinders Die Templates™Any brass stencilsThe additional Charm Embossing Kit will allow:Embossing Charms & FindingsEmbossing with Fiskars® Texture PlatesEmbossing Cuttlebug TM Embossing Folders in the raspberry WizardFlattening Bottle Caps Sandwich Recipes To use these sandwich recipes, simply layer the items listed in order from bottom to top.Follow Wizard User Manual   Instructions for layering die cutting sandwiches with both the purple and raspberry Wizards. Cutting with Steel Rule Dies in both the purple and raspberry Wizards  ã Spellbinders Universal Cut Mat (included with the Wizard, replacements available separately)ã Paperã Steel Rule Die, blade down Cutting with Low-Profile Dies in both the purple and raspberry Wizards  ã White Master Matã Paperã Low Profile Die, foam side down.ã White Master Mat Cutting with Chemically Etched Dies for both the purple and raspberry Wizards ã White Master Matã White Spacer Plate in the purple Wizard orã Magnetic Spacer Plate in the raspberry Wizardã Chemically Etched Die, blade or foam side upã Paperã White Master Mat Embossing with Spellbinders Dies or Brass Stencils in both the purple and raspberry Wizards  ã White Master Matã Die, stencil or texture plateã Paperã Tan Emboss Padã White Master Mat Embossing Charms in both the purple and raspberry Wizards  ã White Master Matã Charmã Paper or Foilã Two Tan Emboss Pads (will depend on the thickness of the charm – thicker charms may take one) ã Blue Emboss Mat Embossing with Fiskars® Texture Plates in both the purple and raspberry Wizards ã White Master Matã Fiskars Texture Plateã Paperã Tan Emboss Padã Blue Emboss Mat Embossing with Cuttlebug TM Embossing Folders in the purple Wizard ã White Master Matã Cuttlebug TM Embossing Folder with paper insideã White Master Mat    Embossing with Cuttlebug TM Embossing Folders in the raspberry Wizard ã White Master Matã Cuttlebug TM Embossing Folder with paper insideã Tan Emboss Padã Blue Emboss Mat Flattening Bottle Caps in both the purple and raspberry Wizards  ã White Master Matã Piece of scrap paperã Bottle cap, flat side (top) downã Tan Emboss Padã Blue Emboss Mat Spellbinders Universal Dies Compatibility Spellbinders Dies are designed around the Wizard® Embossing & Die Cutting System. However, wehave found that they do have limited compatibility with other systems. Please be advised thatSpellbinders two-year Warranty on Spellbinders Dies may be voided by using the dies in other systems.Spellbinders makes no guarantees about the cutting or embossing quality of any system other than theWizard Cutting System.Please check the warranty on your die-cutting system before using Spellbinders Dies with it.Spellbinders is not responsible for any damage incurred by using Spellbinders Dies with other systems. CuttleBug ™ by Provocraft® This machine is capable of cutting and embossing any Spellbinders Die. You will need SpellbindersTan Embossing Mat to emboss in Cuttlebug™ machine. Cutting Sandwich - (Stack from bottom up) 1. A plate2. C plate3. Spellbinders Die (cutting side up) that means the side with the ridges4. paper or cardstock 5. B plate6. Run through Cuttlebug™ machine. Embossing Sandwich-(Stack from bottom up) *Remove C Plate for embossing sandwich1. Place A plate on bottom2. Leave die face up on A plate with die cut still in the die.3. Place one Spellbinders Tan Embossing Mat on top of the die.4. Use 2 or 3 pieces of cardstock to shim. *Cautionary Note : Using more than 3 pieces of cardstock to shim Cuttlebug Embossing sandwich willresult in B Plate breakage. When using Spellbinders Edgeabilities card making dies, shim with only 2pieces of card stock.5. Place two acrylic B plates on top of sandwich and run thru Cuttlebug machine to embossSpellbinders die cuts.6. Turn die over and use like a stencil with inks and chalks for added detail.    Big Shot® by Ellison Design™ (Blue) This machine is capable of cutting and embossing any Spellbinders Die. You will need SpellbindersWhite Spacer Plate and Tan Embossing Mat to cut and emboss in the Big Shot machine. Cutting Sandwich - (Stack from bottom up) 1. Place the Big Shots™ thick white mat down first.2. Place one Spellbinders White Spacer Plate onto the thick white mat.3. Place Spellbinders Die, cutting side up (that would mean the side with the ridges) onto the whitespacer plate.4. Place paper over die.5. Place two Big Shot acrylic mats over paper and roll thru the BigShot™ machine. Embossing Sandwich-(Stack from bottom up) 1. Remove the Spellbinders Spacer Plate while leaving the die in place.2. Place Spellbinders Tan Embossing Mat over the paper and die.3. Shim with 3 pieces of card stock.4. Place two Big Shot acrylic mats on top of Tan Embossing Mat and roll thru Big Shot machine.5. Turn die over and use like a stencil with inks and chalks for added detail. Big Shot™ (Black & Pink) by Ellison-Sizzix® and Big Shot TM for Stampin Up by Sizzix®  This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinderstwo Tan Embossing Mats to cut and emboss in the Big Shot™ machine.Cutting Sandwich - (Stack from bottom up)1. Place large platform down first with all tabs closed.2. Place Spellbinders die face up, (that would mean ridges or bumpy side up).3. Place card stock on Spellbinders die.4. Place two Big Shot™ acrylic mats on top of cardstock.5. Roll thru Big Shot™ machine to die cut shape. Embossing Spellbinders Dies in the Big Shot™ by Ellison-Sizzix® and Big Shot TM for StampinUp by Sizzix® Embossing Sandwich-(Stack from bottom up)1. After cutting, remove acrylic mats from cardstock and die.Leave the Spellbinders die in place with paper die cut out still in the die on the multi-purpose platform.2. Place TWO Spellbinders Tan Embossing Mats on top of die.3. With one piece of 12x6 card stock tri-fold for a shim and place on top of the Tan Embossing Mats.4. Place ONE Big Shot acrylic plate on top and run thru the Big Shot machine. Big Kick™ by Sizzix® This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinderstwo Tan Embossing Mats to cut and emboss in the Big Shot™ machine. Cutting Sandwich - (Stack from bottom up) 1. Place large platform down first with all tabs closed.
Search Related
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks