CityTraffic2Help_EN_v1.pdf

Please download to get full document.

View again

of 26
61 views
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Download

Document Related
Document Description
CityTraffic 2 Manual v1 Please make sure you downloaded latest version of the plug-in from our forum http://forum.rendering.ru Users are provided with the same installation file for both Workstation and Render node If you already use CityTraffic version 1.xx CityTraffic 2 is essentially a brand new system based on the artificial intelligence system, which differs radically from the one used in versions 1.xx. Besides, the whole road construction and traffic management algorithms have significantl
Document Share
Document Tags
Document Transcript
  CityTraffic 2 Manual v1 Please make sure you downloaded latest version of the plug-in from our forum http://forum.rendering.ru Users are provided with the same installation file for both Workstation and Render node If you already use CityTraffic version 1.xx CityTraffic 2 is essentially a brand new system based on the artificial intelligence system, which differs radically from the one used in versions 1.xx. Besides, the whole road construction and traffic management algorithms have significantly changed. Hence, we have not been able to provide compatibility; thus, scenes created in versions 1.xx cannot be opened correctly in CityTraffic 2. However, we have retained the possibility to install both CityTraffic 1.xx and CityTraffic 2 on the same version of 3ds Max. This will allow you to continue working on the files created in older versions and to switch to the new version step by step, whenever possible and necessary. The CityTraffic 1.xx license cannot be used for CityTraffic 2, so you will need to request an additional license for CityTraffic 2 from us by mail@rendering.ru. All CityTraffic 1.xx users will get the CityTraffic 2 licenses free of charge.   Setup CityTraffic2.exe is a version for workstations and render nodes. Supported by 32- and 64-bit 3ds Max (2008, 2009, 2010, 2011, and 2012.) Workstation can be used only when license is properly installed, and provides access to all CityTraffic 2 options. If CityTraffic 2 does not find license file it switches itself to Rendernode mode and only can render files created with CityTraffic 2 Workstation (it is also possible to open and view the file Rendernode but not edit) Rendering is available both locally and over network. To install the program you need to run the CityTraffic2.exe with the administrator rights. (In windows 7 right click install as administrator )    CityTraffic 2  is an automatic vehicles management system. Therefore, bringing the animation generated by the system to the forefront is not recommended.    1) In the middle of each road draw a spline conforming to the terrain. Conforming does not have to be precise; however, the gap between the spline and the ground surface should not exceed the wheel radius of your vehicles . If roads vary in terms of width or number of lanes, then each road type should have its own spline. 2)  Assign a CityTraffic Road(WSM)  modifier to splines. CityTraffic Road(WSM)  modifier has the following parameters:    Shift  – shift of road centerlines against basic spline Strip Width  – lane width Forward Strip  – number of forward lanes Backward Strip  – number of backward lanes Reverse Traffic  – reverse the direction of traffic MaxSpeed  – speed limit for the road Enable for  – types of vehicles allowed on the road If you need to create a road with lanes different in width or speed limit or reserved only for public transport, you can copy a spline, assign a CityTraffic Road(WSM) modifier with different parameters to the copy, and arrange the lanes in order by changing the Shift  value. In this case, differently modified adjacent lanes should slightly overlap edgewise. This will allow vehicles to change lanes correctly. Such a simple road modeling system by no means imply limited capability. You can combine any part of the road from several splines with different CityTraffic Road(WSM) modifiers. This will let you reduce or expand roads, create pullouts and parking bays, and so on. In order to make road narrowings and expansions look correct, you need to add extra elements to the relevant area. See below for an example.
Search Related
Previous Slide

Isuzu

We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x